If you're interested in learning about wi-fi and Bluetooth networking but you can't afford a Flipper Zero, this workshop is for you! Ghost ESP is a network analysis/testing tool that can run on a low-cost ESP32 microcontroller, as well as variants including the ESP32-C3. Ghost ESP offers wi-fi scanning, custom SSID beacons, captive portal mode, […]

Stay tuned for details & registration!

Join us for another beginner-friendly soldering project at Iffy Books! You'll assemble a DIY audio meter kit, which you can use to visualize an audio signal's amplitude. To complete this project you'll need to buy a kit for $7.95. We’re suggesting a $5–$20 donation for the class, no one turned away for lack of funds. […]

Stay tuned for details!

Join us and build a tiny solar-powered square wave generator on a breadboard. No soldering required! The workshop is free to attend, but you'll need to purchase a kit for $12.50 to complete the project. Here's a link to the how-to zine we'll use. And here's a diagram of the oscillator circuit we'll build: Register: […]

Create your own digital audio sampler using a Pi Pico clone board! This project requires some soldering. It's recommended for folks who have soldered once or twice before, but beginners are welcome too. For the programming portion, you can bring a laptop or use one of our lab computers. You'll need to buy a kit […]

The Permacomputing + Solarpunk meetup is every other third Wednesday at Iffy Books! You can join us in person (404 S. 20th St., PHL) or remotely via Jitsi Meet. Virtual meetup link From Permacomputing.net: Permacomputing is a more sustainable approach to computer and network technology inspired by permaculture. Permacomputing is both a concept and a community […]

Join us every other Thursday from 4:30 to 7:00 p.m. for a social soldering session at Iffy Books! Everyone's welcome, from dabblers to experts. Bring a project you've been meaning to work on, or pick a beginner kit off the shelf and get started. We'll have a dozen or so soldering irons available to share. […]

If you're interested in learning about wi-fi and Bluetooth networking but you can't afford a Flipper Zero, this workshop is for you! Ghost ESP is a network analysis/testing tool that can run on a low-cost ESP32 microcontroller, as well as variants including the ESP32-C3. Ghost ESP offers wi-fi scanning, custom SSID beacons, captive portal mode, […]

Stay tuned for details & registration!

Join us for another beginner-friendly soldering project at Iffy Books! You'll assemble a DIY audio meter kit, which you can use to visualize an audio signal's amplitude. To complete this project you'll need to buy a kit for $7.95. We’re suggesting a $5–$20 donation for the class, no one turned away for lack of funds. […]

The Speculative Futures Reading Group meets on the last Wednesday of every month at 7 p.m.!

Stay tuned for details!

Join us and build a tiny solar-powered square wave generator on a breadboard. No soldering required! The workshop is free to attend, but you'll need to purchase a kit for $12.50 to complete the project. Here's a link to the how-to zine we'll use. And here's a diagram of the oscillator circuit we'll build: Register: […]

Create your own digital audio sampler using a Pi Pico clone board! This project requires some soldering. It's recommended for folks who have soldered once or twice before, but beginners are welcome too. For the programming portion, you can bring a laptop or use one of our lab computers. You'll need to buy a kit […]

Join us every other Thursday from 4:30 to 7:00 p.m. for a social soldering session at Iffy Books! Everyone's welcome, from dabblers to experts. Bring a project you've been meaning to work on, or pick a beginner kit off the shelf and get started. We'll have a dozen or so soldering irons available to share. […]

If you're interested in learning about wi-fi and Bluetooth networking but you can't afford a Flipper Zero, this workshop is for you! Ghost ESP is a network analysis/testing tool that can run on a low-cost ESP32 microcontroller, as well as variants including the ESP32-C3. Ghost ESP offers wi-fi scanning, custom SSID beacons, captive portal mode, […]

Stay tuned for details & registration!

Join us for another beginner-friendly soldering project at Iffy Books! You'll assemble a DIY audio meter kit, which you can use to visualize an audio signal's amplitude. To complete this project you'll need to buy a kit for $7.95. We’re suggesting a $5–$20 donation for the class, no one turned away for lack of funds. […]

Stay tuned for details!

Join us and build a tiny solar-powered square wave generator on a breadboard. No soldering required! The workshop is free to attend, but you'll need to purchase a kit for $12.50 to complete the project. Here's a link to the how-to zine we'll use. And here's a diagram of the oscillator circuit we'll build: Register: […]

Create your own digital audio sampler using a Pi Pico clone board! This project requires some soldering. It's recommended for folks who have soldered once or twice before, but beginners are welcome too. For the programming portion, you can bring a laptop or use one of our lab computers. You'll need to buy a kit […]