📓 D̶I̶Y̶ ̶D̶i̶g̶i̶t̶a̶l̶ ̶N̶o̶t̶e̶b̶o̶o̶k̶ ̶W̶o̶r̶k̶s̶h̶o̶p̶ (check back soon!)

We’ll offer this one again soon!

In this workshop you’ll build a digital notebook, a pocket-sized device for taking notes with a USB keyboard. We’re using affordable, widely available components: a Seeed XIAO ESP32-S3 microcontroller, a 1-inch OLED display, and a microSD card reader, arranged on a solderless breadboard. The ESP32-S3 connects to the display via the I2C (Inter-Integrated Circuit) protocol, and to the microSD card reader uses the SPI (Serial Peripheral Interface) protocol.

No soldering required! Cutting and stripping jumper wires requires a degree of manual dexterity.

Please bring a laptop if you have one! If not it’s OK.

Instructions