For this workshop you’ll use a Pi Pico board and CircuitPython to create a programmable mechanical keyboard with two keys. No soldering experience necessary!

To complete this project you’ll need to buy a kit for $11. Here’s what’s included:

• RP2040/Pi Pico board
• 2 mechanical keyboard switches
• 2 key caps
• 4 two-inch stripped wires
• 3″ 1mm heat shrink tubing
• oak base with pilot holes
• 8 M2 Screws
• 8 M2 spacer rings
• sandpaper square

➡️ Instructions & links

Register