We're postponing this worksh0p until July 11th because the parts didn't arrive in time. Sorry for the inconvenience! This event will include an introduction to Meshtastic, followed by a beginner-friendly workshop where the attendees will build and take home a Meshtastic node of their own. Attendees will learn about Meshtastic, building a simple electronics project, […]

In this workshop we'll make little clay sculptures with NFC tags embedded inside, which you can use to trigger shortcuts on your phone. Fun! Here's a link to a blog post about this project. Register:

Come experiment with VHS tapes and audio cassettes! We'll have equipment on hand for analog-to-digital and digital-to-analog transfers. Register:

An introduction to MIXXX, a free and open source DJ program for macOS, Linux, and Windows. It supports a wide range of DJ controller devices and audio file formats. You'll need to bring your own laptop and headphones for this workshop. We also recommend bringing a separate USB keyboard if you have one, ideally with […]

Our June Le Guin will be the short story "The Ones Who Walk From Omelas," which we'll read alongside NK Jemisin's "The Ones Who Stay and Fight" and Isabel J. Kim's "Why Don't We Just Kill the Kid in the Omelas Hole." All three stories are available at this list; there are a number of stories […]

For this class we're building a spinning top toy with LED lights that flash when it spins. No previous soldering experience required! Registration    

Stay tuned for details!

Join us and build a tiny solar-powered square wave generator on a breadboard. No soldering required! The workshop is free to attend, but you'll need to purchase a kit for $12.50 to complete the project. Here's a link to the how-to zine we'll use. And here's a diagram of the oscillator circuit we'll build: Register:

In this workshop you'll build a device that displays your GPS coordinates and the current time, without connecting to the internet or transmitting anything. 100% passive and off-grid, no internet or cell connection needed! We'll use the MicroPython programming language and the Thonny IDE, following the instructions on this page. You'll need to purchase a kit to […]

Come experiment with VHS tapes and audio cassettes! We'll have equipment on hand for analog-to-digital and digital-to-analog transfers. Register:

An introduction to MIXXX, a free and open source DJ program for macOS, Linux, and Windows. It supports a wide range of DJ controller devices and audio file formats. You'll need to bring your own laptop and headphones for this workshop. We also recommend bringing a separate USB keyboard if you have one, ideally with […]

For this class we're building a spinning top toy with LED lights that flash when it spins. No previous soldering experience required! Registration    

This event will include an introduction to Meshtastic, followed by a beginner-friendly workshop where the attendees will build and take home a Meshtastic node of their own. Attendees will learn about Meshtastic, building a simple electronics project, and how to solder. Meshtastic nodes allow users to send text messages to each other using the LoRa […]

Join us and build a tiny solar-powered square wave generator on a breadboard. No soldering required! The workshop is free to attend, but you'll need to purchase a kit for $12.50 to complete the project. Here's a link to the how-to zine we'll use. And here's a diagram of the oscillator circuit we'll build: Register:

In this workshop you’ll build a digital notebook, a pocket-sized device for taking notes with a USB keyboard. We’re using affordable, widely available components: a Seeed XIAO ESP32-S3 microcontroller, a 1-inch OLED display, and a microSD card reader, arranged on a solderless breadboard. The ESP32-S3 connects to the display via the I2C (Inter-Integrated Circuit) protocol, […]

In this workshop you'll build a device that displays your GPS coordinates and the current time, without connecting to the internet or transmitting anything. 100% passive and off-grid, no internet or cell connection needed! We'll use the MicroPython programming language and the Thonny IDE, following the instructions on this page. You'll need to purchase a kit to […]