For this workshop you’ll use a Pi Pico board and CircuitPython to create a programmable mechanical keyboard with two keys. No soldering experience necessary!

To complete this project you’ll need to buy a kit for $14. Here’s what’s included:

• RP2040/Pi Pico board
• 2 mechanical keyboard switches
• 2 key caps
• oak base with pilot holes
• 4 stripped wires (2″)
• 1 mm heat shrink tubing (3″)
• 4 M2 screws
• 4 M2 spacer rings
• sandpaper square

➡️ Instructions & links

Register