Create your own digital audio sampler using a Pi Pico clone board! This project requires some soldering. It’s recommended for folks who have soldered once or twice before, but beginners are welcome too. For the programming portion, you can bring a laptop or use one of our lab computers.

You’ll need to buy a kit for $16.95 to complete this project. We’re suggesting a $10–25 donation for the workshop.

➡️ Instructions & example code

Here’s what’s included in the kit:

• RP2040/Pi Pico board
• wood block w/ pilot holes
• 3.5mm stereo jack w/ screw terminals
• 2×4 push button keypad
• 2 push button switches
• 10 screws
• tiny screwdriver
• 20 header pins
• 4.7 uF capacitor
• 9 port to port jumper wires
• 2 port to stripped jumper wires
• 1″ stripped wire
• 3″ tie wire
• 8 plastic spacer rings
• micro USB cable w/ data

Register